Before use, check the technical condition of the replica. Make sure all controls work properly, the slide or bolt moves smoothly, and the nozzle inside the mechanism is not blocked.
If the replica is not working correctly, the cause may be dirt or lack of lubrication. The replica should be cleaned and lubricated with the recommended grease.
Always use the gas specified for your replica (e.g., green gas).
Clean the slide assembly, the slide itself, and the trigger assembly from dirt, and lubricate them with oil or silicone grease.
Be careful: too much grease or oil can cause malfunctions, such as incorrect hop-up operation.
Magazine valves should also be lubricated with silicone oil and kept clean, as dirt can lead to gas leaks.
Regularly clean and lubricate the inside of your GBB replica. This will reduce the risk of malfunctions and prolong the life of your replica.
Czy ten artykuł był pomocny?
To wspaniale!
Dziękujemy za opinię
Przepraszamy, że nie udało nam się pomóc!
Dziękujemy za opinię
Wysłano opinię
Doceniamy Twój wysiłek i postaramy się naprawić artykuł