Spring-powered replicas need to be manually reloaded before each shot. This means that after every shot, you must pull back the slide or bolt to compress the spring and engage the piston.
Remember: after each reloading, you should fire the replica. Do not reload the replica multiple times without firing, as this can load extra BBs into the hop-up chamber and damage the bucking.
Spring replicas work as a closed system: when reloaded, the nozzle seals against the bucking, and a BB is loaded into the chamber.
If the hop-up is not properly adjusted, BBs may drop out of the chamber due to gravity. In that case, adjust the hop-up to stop BBs from falling out.
Czy ten artykuł był pomocny?
To wspaniale!
Dziękujemy za opinię
Przepraszamy, że nie udało nam się pomóc!
Dziękujemy za opinię
Wysłano opinię
Doceniamy Twój wysiłek i postaramy się naprawić artykuł