Before using a tracer, charge the battery and check that there are no loose parts, and that the housing and threading are not damaged.
Attach the tracer to the outer barrel of the replica, making sure it is properly tightened, not wobbly, and not screwed in at an angle—incorrect installation can damage the tracer when a BB is fired.
Use only BBs designed for tracers—only these BBs will light up. Make sure the replica’s inner barrel does not block the sensors inside the tracer.
Avoid submerging the tracer in water, as this can damage the electronics.
After use, clean the tracer and turn it off. Leaving it on for a long time can drain and damage the battery.
Czy ten artykuł był pomocny?
To wspaniale!
Dziękujemy za opinię
Przepraszamy, że nie udało nam się pomóc!
Dziękujemy za opinię
Wysłano opinię
Doceniamy Twój wysiłek i postaramy się naprawić artykuł