If you hear disturbing sounds from the replica, such as metallic grinding, or if you can only hear the motor running, you need to adjust the motor height screw.
The screw is located in the center of the pistol grip base plate, or—after removing the pistol grip—in the center of the motor cage.
Tighten the screw by one full turn and test the replica.
If the sound improves but is still not correct, repeat the process until the sound is proper.
If the screw is tightened too much, the replica may make a knocking sound—if this happens, slightly loosen the screw.
WARNING!
If the sound is still incorrect after adjustment, or if the replica does not shoot, contact our service department or fill out the warranty claim form.
https://www.taiwangun.com/claims.html
Czy ten artykuł był pomocny?
To wspaniale!
Dziękujemy za opinię
Przepraszamy, że nie udało nam się pomóc!
Dziękujemy za opinię
Wysłano opinię
Doceniamy Twój wysiłek i postaramy się naprawić artykuł